Mini Digital Power LCD Portable Digital Single Phase Energy Meter
KWH Watt Meter Electricity
- Model YEM024SJ three phase four wire electronic DIN rail active
energy meter is a kind of new style three phase four wire
electronic active energy meter, it adopts micro-electronics
technique, and imported large scale integrate circuit, uses
advanced technique of digital and SMT techniques, etc.
- It has its completely independent intellectual property rights and
minimum size, and also a new three phase four wire active energy
- The meter completely accords with relevant technical requirements
of class 1 three phase active energy meter stipulated in
international standard IEC 62053-21.
- It can accurately and directly measure 50Hz or 60Hz active energy
consumption from three phase four wire AC electricity net.
- This meter has white backlight source eight digits LCD displays
shows the active energy consumption.
- It has following features: good reliability, small volume, light
weight, specious nice appearance, convenient installation, etc.
1. 35mm standard DIN- rail installation, complying with standard
2. Four pole width (Modulus 17.5mm), complying with standard
3. Standard configuration 7+1 digits display (9999999.1kWh) by
white backlight source LCD. May select 7+1 digits display
(999999.1kWh) without backlight source general LCD, (Product
Configuration code is SK).
4. Standard configuration pulse output passive (polarity),May
select distant impulse output passive (nonpolarity).And contact
with all kind of AMR system conveniently,Complying with standard
IEC 62053-31 and DIN 43864.
5. Four LED respectively instructions every power supply state and
signal of energy impulse.
6. Automatic detection the direction of the flow of load current.
And Instructions on individual LED
7. Single direction three components measure three phase four wire
active energy consumption. It is
nothing with direction of the flow of load current. Complying with
standard IEC 62053-21.
8. Directly connect operation, type S wiring (inlet from top,
outlet from bottom),.
9. Extension terminals cover,in order to protect to use safety.
|Reference Voltage(V)||Current Specification(A)||Staring Current(A)||Display Mode||Insulation Performence|
|3x127/220 V ,3x230/400 V||5(100)A||0.02A||LCD 7+1||AC voltage 4kv for 1 minute,1.2/50us wavefrom impulse voltage 6kv|